When last we met, the front rain gardens and canopy trees were being discussed, here’s how the back is shaping up:
When the builder left, a small group of Eastern White Pines and a young Scots Pine were remaining from the original site. There were not in any way remarkable trees, and over time the White Pines would have become completely unmanageable as they grew to their gargantuan typical height– 80′-120′ is not uncommon, with trunk girth in excess of 3′. As is typical, these was a thick carpet of old needles smothering any effort at landscaping below and precluding extending the yard in that direction. We took down the pines (recycled), ground out all the stumps, and raked out the pine needles.
The clients wanted to increase usable lawn space while also adding shrub borders. I took into consideration the borders to be installed on the other side of the fence at The Old Lacey House to arrive at this design. The anchoring corner tree is a Japanese Maple which was incorrectly sited originally in one of the front raised beds.
As the plan was installed the clients opted for shortening the long bed in favor of more play space for their growing family.
All in all we added about 250 sq. ft. of turf and 3 new shrub borders. A to-do list and planting materials list:
Groom ground where tree removal took place, lay sod (approximately 150 sq. ft.)
Cut new mulched beds along property lines as per drawing (reuse cut sod on yard where possible). Spaded edge
Amend planting beds with 2″ good quality compost
Plant in as per drawing
Top dress with double shredded hardwood or pinestraw
Lay large Pennsylvania steppers as per drawing
Hydrangea arborescens ‘Annabelle’, Itea virginica ‘Henry’s Garnet’, Thuja occidentalis ‘Degroot’s Spire’, Fothergilla Mt. Airy, Taxus x media ‘Hicksii’, Magnolia virginiana ‘Dodd’s Small Leaf Form’, Iberis sempervirens ‘Purity’, Galium odoratum
Within the same neighborhood as our ongoing improvements at The Old Lacey House (click the link for detailed history of this Civil War Era home), green•eye•design recently completed a landscape improvement project for a lovely 21st Century-constructed home.
The owners approached for improvements over the ‘pre-installed’ tree & shrub choices the building contractor installed as the home was being finished. I have observed quite often that a builder will become comfortable with a small palette of trees and shrubs and then never waver from those selections, often to the detriment of both the home’s lines as well as site conditions, sun exposure, etc. Another move is to simply find whatever is on sale at the local big box chain store and use that.
Certainly this landscape was no exception, with trees planted near the foundation that– when mature– would have completely eaten the facade. Boxwoods were planted in southern exposure and were baking in the all-day sun. (indeed, several were already dead). Plants which need even moisture were planted in raised rain gardens in which their roots would be periodically inundated with the stormwater runoff from the roof’s downspouts. So, I whipped up this design:
An existing Crape Myrtle was transplanted down to the small front lawn area where a flowering Cherry had expired over the winter, and a small specimen of Amelanchier canadensis ‘Autumn Brilliance’ (Serviceberry, Shadblow, Saskatoon) was planted at an appropriate distance from the foundation.
A few soil issues were addressed also. Now all the plants are both floriferous and attractive, and have the benefit of enjoying ‘wet feet’ during times of periodic root inundation. Many of the choices also produce attractive berries for wildlife or for cutting. This came together very well, next we’ll talk about the backyard’s improvements.
A to-do list and plant materials list:
Pop out grasses & nandina for replanting after grading
Remove Boxwoods and save best for rear yard transplanting (4-5 total for both sides)
Remove Crape Myrtle for replanting where dead Prunus is on front lawn
Remove and discard dead Prunus
Add approximately 4″ high quality, largely organic screened topsoil, regrade so front of bed elevation matches front right raised bed. Regrade to take out 2″ or so of the depth of the catchment shape to the bed.
Plant in new plants as per drawing
Top dress with double shredded hardwood or pinestraw
Transplant existing Japanese Maple to rear yard corner garden focal point
Plant in new plants as per drawing
Top dress with double shredded hardwood or pinestraw
A few months ago we began the design process for a lovely existing home in McLean, VA. The clients wanted a new second story outdoor room (the words screened-in porch, sunroom, screen room, outdoor room, etc all were bandied between us) and also an open deck. In chatting with the clients and in surveying the property, I could see almost immediately that this would be a project where finesse and sensitivity to the existing architectural lines would be important. The home is a late 1970’s ‘Midcentury Modern’, with a West Coast panache that is remarkable. Entirely sheathed in redwood siding, the home underwent a major renovation in the early 2000’s, and the lines vastly improved by Mickey Simpson Architects. Mickey adroitly fixed some longstanding siding issues by giving the home appropriately weighty roof overhangs all around, as well as improving the shading and shadow lines of the facades. Lap-seam metal siding above the garage also improved the feel of the space by modernizing the look and clean lines of the front deck.
At some point a very large second story backyard deck was built, and it was in this area that the clients wanted to rebuild. Construction methods for this existing deck were ‘creative’, and in addition to dubious load support framing of the deck and support posts, the deck was also simply coming to the end of its life. So, a teardown was planned with all new appropriate, to-code framing, support posts, and footers dug to carry the load of the new deck.
The design itself came together over a period of weeks as I juggled client wishes (e.g., program elements) with design ideas which honor the look & feel of the space. Above all else, in deck and outdoor room designs I strive to create spaces which do not look ‘tacked on’ as an afterthought to the main house’s architecture. A striking feature to this home are the strong protruding ‘wings’ which extend about 4′ out from the rear facade; they create a ‘frame’ visually, the planes of which I did not want to arbitrarily break with the new deck and outdoor room. I also love the bifurcated roof, and I knew I wanted to bring that strong sloping plane down into whatever room design I would come up with. The clients’ wishes included having one set of the existing sliding glass doors to open up onto the deck, while the other set of glass doors should open up into the outdoor room. Proximity to the kitchen dictated that the room be positioned to the left, and the deck to the right. I loved the idea of making the space as open and airy as possible, while still making an area secure against rain and wind, as well as our notorious buggy weather. Large open spaces are a lovely byproduct of traditional timberframing techniques, so I combined timberframing with the typical framing techniques found in high quality deck construction and presented this: The outdoor room’s key feature is the use of large retractable screen panels, which allow for the space to be completely open on fair days, as well as unifies the deck floor both under the floating roof and out into the exposed deck areas. At the touch of a button, screens roll down and the entire room can be screened off in just a few moments for bug-free entertaining. The combination of heavy timberframe beams along with the open airy spaces makes for a lively and really pleasant atmosphere. Stay tuned, we’re breaking ground on this project presently and will have construction photos soon…
The old deck has been successfully demo’d and disposed of responsibly:
An interesting architectural feature of the home’s original small balconies can be seen above. The joists for the balcony are actually the same as for the 2nd story floor, they extend out through the facade 4′ (the existing 3rd story master bedroom suite balcony is the same way, you can see it upper left).
Framing starts next week!
Framing continues in earnest, the crew is really going full steam and making great headway.
Some extensive rot was occurring in the fascia boards and railings of the upper balconies, those have been replaced as well.
We’ll wait several months for the new wood to dry down and silver, then we will blend a custom stain to match the existing redwood.
Perfect deck-building weather day after day means this project is coming together fast.
Staircase rail posts and railings going in. To do: Install stair lights and top rails
Even though the square footage is quite generous (indeed, it’s larger than the previous deck), because care was taken with lines and railing choices, the deck appears quite tidy and not like a tumor growing from the house. Above you can see one of the 4′ ‘wings’ extending out from the rear facade of the house.
Above you can see how we solved the architectural puzzle of the floating 2nd story interior floor joists. If you recall, in the original blueprints these joists were taken right through the rear wall of the home and extended out into a 4′ balcony. One must tread carefully when dealing with original construction: It would be unwise to simply saw these off, install the ledgerboard, and be on our way framing out a typical deck. In addition to creating holes which would need careful sealing, it’s a dishonorable quick fix which damages the history of the house, in my opinion. Instead, we married our new pressure treated joists to the old joists, then brought the load carrying member out 4′,; you can see the beam to the right in the photo. That beam will carry the load from that point forward to the edge of the deck, replacing the need for the ledgerboard.
I think this fireplace turned out exceptionally beautifully. Because of the age of the house as well as the design concept, a ‘patina of age’ was necessary for all of the outdoor elements.
How to achieve this with new construction? There are various ways to distress or ‘weather’ new blocks or bricks, such as tumbling or acid washing, but nothing can match the sublime beauty of genuine antique bricks. For this project, we found lovely one hundred plus year old bricks from a small supplier in Maryland. Using salvaged bricks adds to construction costs but for something like this it’s completely worth it.
Several months ago I began discussing with The Virginia Hospital Center the possibility of designing several planting areas scattered around the hospital grounds, difficult, high traffic or neglected areas of opportunity. During the course of those conversations we were offered a fabulous opportunity: Develop & design a new outdoor space at the confluence of three major structures: Between the main hospital building & the Women & Infants health center and above the subterranean Radiation Oncology suites.
click images to embiggen
It is the Oncology Department which is the driving factor in this project; a new, state-of-the-art Linear Accelerator (pdf file) and its encompassing support suites are to be built below the space, resulting in a seven million dollar major engineering and architectural change to the facility.
To date, the space seen above has over time become a bit of a catchall in terms of engineering solutions– by that I mean, the outdoor environment has been utilized primarily as a repository and support system for the existing radiation suites below.
Here we see the cooling units for the Cyberknife® suite and supporting equipment. Obviously maintaining optimal temperatures is critical with multimillion dollar equipment, and this space represented the nearest, most cost-effective location.
The raised planter in the foreground is an integral part of the radiation shielding assembly, which consists of several feet of reinforced concrete, lead lining, brick, and of course the several feet of earth inside the planter. The planter’s shape reflects the radiation oncology suite below ground.
A space was opened up at ground level in order to crane in various pieces of heavy, precious medical equipment, and a skylight was seen as a beneficial solution in case repairs or replacements ever had to be made in the future. Unfortunately, it’s been plagued with leaks and has been quite a liability overall.
This much taller planter is part of another suite’s shielding assembly, and again the brick and earth are absolutely critical in terms of radiation abatement. Removing this planter would result in hundreds of thousands of dollars being incurred in additional lead shielding and the structural support required to bear the additional load (around forty additional tons on this small footprint).
Stowmwater runoff is dealt with inefficiently, as a problem to be moved as quickly as possible away from the space.
It strains credulity, but a stairwell (over on the left) pops up into the space as well, a mandatory fire safety element the need for which thankfully will be eliminated with the new construction.
An abandoned door into the space will be removed with the construction, but what of this narrow ‘hallway’? A recent awning removal reveals stained brick which adds to the feeling of disjointed uneasiness.
As patients/visitors drive in, this is what they see from curbside.
Conclusions: This is a fabulous area, rich with the patina of age and full of unique design challenges. In my next post, I will start to lay out our design process, our goals, and how we will achieve them.
So I was very happy to learn that the residential clients for the project on Elmwood Avenue in historic Oak Park, IL wanted to move forward before things got really cold (and the ground unworkable). These past few weeks have been controlled insanity as a major renovation/addition project is ongoing at the house, so what’s a little major foundation planting? Why not, right?
click image for much larger version
A few photos the clients kindly took for me on this very rainy & cold windy day:
Almost too wet to work, still the ground was not clumpy or sticky so on we go with the install.
Looking down the driveway towards all the construction materials. The long side of the house will remain undeveloped until the spring, this will allow freer access for all the large construction vehicles and also ease the repaving job. Plants would scald pretty easily being so close to burning hot, newly-laid asphalt. As well, painting the house will be much less time-consuming without having to work around foundation plants.
The beds are laid out and hedging spacing adjusted. The Degroot’s Spire Arborvitae are just gorgeous, and the encircling boxwoods healthy and full.
Tidied up, edged with new sod, and hardwood mulch laid. There are several shrubs & one tree, a Chinese Paperbark Maple (Acer griseum), which will be planted in early spring.